Supports the following Serial Numbered Equipment

1. CIC Pro^TM  - Bedrock - Serial Number's starting with "JA"
2. CIC Pro^TM  - Bedrock - Serial Number's starting with "SCH"
3. CIC Pro^TM  - MP100 - Serial Number's starting with "SDY"
4. CARESCAPE Central Station V1 - MP100 - Serial Number's starting with "SGJ" 
5. CARESCAPE Central Station V2 - Serial Number's starting with "SKN"
6. CTS - MP100 - Serial Number's starting with "SEE"

Usage

1. Bedrock (Versions 4x & 5x)
   1. Insert USB Drive into an open USB slot on running Bedrock CIC.
   2. From the CIC Setup screen, select the Service Password tab.
   3. At the C:\Program Files\Marquette\CIC\4.0.x> prompt, type  “F:” and Enter
   4. In the Command prompt window type “1” and Enter.
   5. This will open a new window and then type “2” and Enter. This will launch the program.
   6. Select the Drive D: (Hard Drive) from the buttons under the Menu at the top.
      1.  NOTE: Drive C: and E: are the Compact Flash.
   7. Verify the Health Status
   8. Record the power on Hours in the spreadsheet if applicable.

2. ​MP100 (Versions 5x & 6x), CARESCAPE Central Station V2 and CTS.​​
   1. At the C:\Program Files\Marquette\CIC\5.0.x> prompt, type  “H:” and Enter
   2. In the Command prompt window type “1” and Enter.
   3. This will open a new window and then type “2” and Enter. This will launch the program.
   4. Select the Drive G: from the buttons under the Menu at the top.
   5. Verify the Health Status
   6. Record the power on Hours in the spreadsheet if applicable.