CIC Utility (Free Version)

CIC Hard Drive Diagnostics Utility (Free Version)

Supports the following Serial Numbered Equipment

1. CARESCAPE Central Station V2 – Serial Number’s starting with “SKN“
2. CARESCAPE Central Station V1 – MP100 – Serial Number’s starting with “SGJ”
   

   

3. CTS – MP100 – Serial Number’s starting with “SEE“
4.  CIC Pro^TM  – MP100 – Serial Number’s starting with “SDY“
5. CIC Pro^TM  – Bedrock – Serial Number’s starting with “SCH“
6. CIC Pro^TM  – Bedrock – Serial Number’s starting with “JA“

Supports the following features

1. CIC Hard Drive Status
   1. CIC Hard Drive Hours
      1. Power on Count
      2. Power on Hours

Usage

1. Bedrock (Versions 4x & 5x)
   1. Insert USB Drive into an open USB slot on running Bedrock CIC.
   2. From the CIC Setup screen, select the Service Password tab.
   3. At the C:\Program Files\Marquette\CIC\X.0.x> prompt, type  “F:” and Enter
   4. In the Command prompt window type “1” and Enter.
   5. This will open a new window and then type “2” and Enter. This will launch the program.
      1. 1.  NOTE: Drive C: and E: are the Compact Flash.Select the Drive D: (Hard Drive) from the buttons under the Menu at the top.
   6. Verify the Health Status

2. ​MP100 (Versions 5x & 6x), CARESCAPE Central Station V2 and CTS.​​
   1. At the C:\Program Files\Marquette\CIC\X.0.x> prompt, type  “H:” and Enter
   2. In the Command prompt window type “1” and Enter.
   3. This will open a new window and then type “2” and Enter. This will launch the program.
   4. Select the Drive G: from the buttons under the Menu at the top.
   5. Verify the Health Status

Links

• CTS Files
• Hard Drive Diagnostics Utility Instructions
• CrystalDiskInfo

CIC PRO / Bedrock

Carescape^TM MP100 / MP100R (Ver 5.x & 6.x), Carescape V2