CIC Hard Drive Diagnostics Utility (Paid Version)
Supports the following Serial Numbered Equipment
- CARESCAPE Central Station V2 – Serial Number starting with “SKN“
- CARESCAPE Central Station V1 – MP100 – Serial Number starting with “SGJ“
- CTS – MP100 – Serial Number starting with “SEE“
- CIC ProTM – MP100 – Serial Number starting with “SDY“
- CIC ProTM – Bedrock – Serial Number starting with “SCH“
- CIC ProTM – Bedrock – Serial Number starting with “JA“
Supports the following features
- CIC Hard Drive Status
- CIC Hard Drive Hours
- Power on Count
- Power on Hours
- CIC Hard Drive Hours
- Network IP Scan
- IP Tools for testing
- Screen Capture Utility ( to send screen shots to support)
- Backup Options
- Copy CIC Backup to USB Drive
- Copy Log Files off of CIC to USB
- Change Time on CIC
Usage
-
-
- Insert USB Drive into an open USB slot on running Bedrock CIC.
- From the CIC Setup screen, select the Service Password tab.
- At the C:\Program Files\Marquette\CIC\X.0.x> prompt, type “F:” and Enter
- In the Command prompt window type “menu” and Enter.
- This will open a new window and then type “2” and Enter. This will launch the program.
- Select the Drive D: (Hard Drive) from the buttons under the Menu at the top.
- NOTE: Drive C: and E: are the Compact Flash.Bedrock (Versions 4x & 5x)Verify the Health Status
- MP100 (Versions 5x & 6x), CARESCAPE Central Station V2 and CTS.
- Insert USB Drive into an open USB slot on running Bedrock CIC.
- From the CIC Setup screen, select the Service Password tab.
- At the C:\Program Files\Marquette\CIC\5.0.x> prompt, type “H:” and Enter
- In the Command prompt window type “menu” and Enter.
- This will open a new window and then type “2” and Enter. This will launch the program.
- Select the Drive G: from the buttons under the Menu at the top.
- Verify the Health Status
- Record the power on Hours in the spreadsheet if applicable.
- MP100 (Versions 5x & 6x), CARESCAPE Central Station V2 and CTS.
-
HD Spreadsheet
Data Entry Section
Hard Drive by Hours
CIC PRO / Bedrock
CarescapeTM MP100 / MP100R (Ver 5.x & 6.x), Carescape V2 & CTS