MTBS Modular Telemetry Bag System

Modular Telemetry Bag System (MTBS)

Features / Advantages and Benefits!

 

 

INFORMATION:

MTBS design allows transmitter to be worn in different configurations:

  1. One Bag, Different wear configurations.
    1. In gown pocket.
    2. Attached to gown with badge clip.
    3. Worn around neck via Velcro® Foam Strap.
    4. Worn around neck via Anti-Microbial Lanyard.
  2. MTBS design allows transmitter to be worn for best comfort level of patient.
  3. MTBS is custom fit to each individual transmitter to reduce bulk of unit.
    1. Each bag is custom punched for specific leads creating watertight seal.
    2. If using 5 lead or 6 lead MTBS are custom fit bags to transmitter.
    3. When using SpO2 interface bag has cut out for interface.
    4. When using telemetry transmitter without SpO2 interface cable, use bag that keeps interface ports covered.
  4. MTBS floats when dropped in water containing a telemetry transmitter.
  5. MTBS Increases Profit on Return of telemetry transmitter investment.

MADE in the USA.

CLEANING:

MTBS Reduces Cleaning Time

  1. Prevents solid matter from getting into seams and bulkheads (sockets for patient leads).
    1. Reduces cross contamination hazard.
  2. MTBS Decreases possibility of fluid intrusion,
    1. If battery door is not closed completely.
    2. Interface ports not covered.
    3. Lead sets are used that leave ports open.
  3. MTBS Decreases number of telemetry transmitter repairs.
  4. MTBS Decreases down time of telemetry transmitters.
  5. MTBS Increases life of telemetry transmitters.
    1. Reduces the amount of metal corrosion introduced while cleaning.

 

PATIENT SATISFACTION:

  1. MTBS Reduces patient agitation.
    1. Allows for reading transmitter displays without removing transmitter from bag.
    2. Resealable closure allows easy access to replace battery without removing transmitter. Keeps telemetry transmitters looking like NEW.
  2. MTBS will increase patient satisfaction.

 

Modular Telemetry Bag System (MTBS)

Wear Options Assembly Instructions

 

Inside Pocket

Components:

A.   MTBS Bag (with or without SpO2 cutout)   

  1. Insert Telemetry Transmitter with leads end first.
  2. Make sure cutout for leads is over leads plug.
    1.  (the label is on the front of the transmitter for most transmitters)
  3. Plug in leads to transmitter.4.  Place MTBS into gown pocket.

 

Velcro® Foam Strap

Components:

A.   MTBS Bag (with or without SpO2 cutout)

B.   Velcro® Foam Strap with secure adhesive hooks

  1. Insert Telemetry Transmitter with leads end first.
  2. Make sure cutout for leads is over leads plug.
    1. (the label is on the front of the transmitter for most transmitters)
  3. Plug in Leads to transmitter
  4. Peel Backing from Velcro® tabs and stick to side of the transmitter and repeat on the other side.

Gown Clip On

Components:

A.   MTBS Bag (with or without SpO2 cutout)

B.   Hang Tab

C.   Badge Clip

  1.  Insert Telemetry Transmitter with leads end first.
  2. Make sure cutout for leads is over leads plug.
    1. (the label is on the front of the transmitter for most transmitters)
  3. Plug in leads to Transmitter.
  4. Peel hang tab from backing and stick on the back of the transmitter bag on the opposite end of the zip seal.
  5. Hook clip through hang tab

Anti-Microbial Lanyard

Components:

A.   MTBS Bag (with or without SpO2 cutout)

B.   Hang Tab

C.   Anti-Microbial Breakaway Lanyard

  1.  Insert Telemetry Transmitter with leads end first.
  2. Make sure cutout for leads is over leads plug.
    1. (the label is on the front of the transmitter for most transmitters)
  3. Plug in leads to Transmitter.
  4. Peel hang tab from backing and stick on the back of the transmitter bag on the opposite end of the zip seal.
  5. Hook lanyard clip through hang tab.

PPE protects both your Patient and your Staff from Hazardous Materials!

Shouldn’t you’re Telemetry Transmitters have the same protection?

 

 

Contact Mark Wilkins Today for more information: Toll Free:(844)469-4888 or mwilkins@ctsbiomedical.com

 

 

Modular Telemetry Bag System (MTBS)

Assembly Station Options

 

Introductory Kit (Intro)

Small Nurses Station (SNS)

Medium Nurses Station (MNS)

Central Monitoring Unit (CMU)

Includes Portable Box

 Hanging File Folders for easy access:

  • 100 MTB Bags
  • 25 Foam Straps
  • 25 Clips
  • 50 Hang Tabs
  • 25 Anti-Microbial Lanyards
  • Introduction to the Modular Telemetry Bag System (MTBS) as a starter kit
  • This Kit is also good for a small/remote Nurses Station that keeps Telemetry Transmitters at the Nurses Station.

Customizable for resupply to your needs

Includes 4 Drawer Storage Cart w/wheels

 Top 2 drawers for:

  • 100 MTB Bags/200 MTB Bags, 100 Foam Straps, 100 Hang Tabs, 100 Badge Clips, 100 Anti-Microbial Lanyards
  • Immediate Resupply Drawers
  • 300 MTB Bags, 200 Foam Straps, 200 Hang Tabs, 200 Badge Clips, 200 Anti-Microbial Lanyards
  • Rolls under desk

As with the MTBS Bags, The MTBS Assembly Stations are modular in configuration to fit YOUR needs!

Customizable for resupply to your needs

Includes, Assembly Tray & dolly for 2/3 bins

 Top Assembly Tray (w/dividers)

  • 200 MTB Bags, 50 Foam Straps, 200 Hang Tabs, 100 Badge Clips, 50 Anti-Microbial Lanyards
  • Immediate Resupply Tray (w/dividers)
  • 400/800 MTB Bags, 100 Foam Straps, 300 Hang Tabs, 300 Badge Clips, 100 Anti-Microbial Lanyards
  • Rolls under Desk
  • Optional) – Resupply Tray (w/dividers)
  • 400 each (MTB Bags, Foam Straps, Hang Tabs, Badge Clips, Anti-Microbial Lanyards)
  • (Optional) – Tray Lids

Customizable to Meet your needs

Includes, Assembly Tray & cart w/4 drawers

 Top Assembly Tray (w/dividers)

  • 200 MTB Bags, 100 each (Foam Straps, Hang Tabs, Badge Clips, Anti-Microbial Lanyards)
  • Immediate Resupply Tray (w/dividers)
  • 500 each (MTB Bags, Foam Straps, Badge Clips, Hang Tabs, Anti-Microbial Lanyards
  • Large Resupply Tray’s 2&3 (w/dividers)
  • 500 each (MTB Bags, Foam Straps, Badge Clips, Anti-Microbial Lanyards)
  • (Optional) – Transmitter drawer w/dividers bottom wire rack
  • (Optional) – Tray Lids

Customizable to Meet you resupply needs

PPE is required and necessary for all employees.

Shouldn’t you’re Telemetry Transmitters have the same protection?

 

 

Contact Mark Wilkins Today for more information: Toll Free:(844)469-4888 or mwilkins@ctsbiomedical.com

 

 

 

Start typing and press Enter to search

Shopping Cart

No products in the cart.